Masonry refers to building buildings from individual independent units that are often bound together and laid into the mortar; also, the word masonry may refer to these units themselves. Masonry is a design concept that has been around for many centuries and is still utilized in some of the most modern homes on the market. It was initially used to build affordable homes. Masonry is still used today to build high-end homes. Some masonry is done by hand, but many builders use modern masonry techniques. Long Island is commonly used in residential as well as commercial projects.
Commercial Masonry refers to masonry that uses durable reinforced concrete, tiles, or blocks to build walls, floors, and roofs. Commercial Masonry is commonly seen in hospitals, industrial plants, and government buildings. Commercial Masonry usually consists of unbroken walls that are poured with mortar. There is nothing decorative or stylized about commercial masonry, just solid masonry.
Masonry is usually constructed using stone, brick, concrete block, or ceramic tile. Masonry is often comprised of granite, marble, and limestone. The use of other materials is becoming less common; bricks, for example, are becoming too expensive to use extensively in commercial Masonry. Masonry may be combined with stucco in order to give the building a stucco like appearance. Stucco can be very attractive and hard wearing, but is usually not used in Masonry buildings.
The primary materials used in masonry construction are stone, wood, cement, glass, and steel. The basic idea is to use the most durable materials possible to allow for high stress load due to many years of weathering. The result is a building that has a very high degree of tensile strength. Tensile strength refers to the ability of a material to withstand being pulled and bent repeatedly without damage. High tensile strength allows materials to be pulled and easily bent, but will not buckle under normal circumstances.
Most buildings that are constructed are single stories in height. However, some Masonry structures may be part of multi-story structures. Multi-story Masonry is normally bound together in what are called story sections. All of the individual units of masonry are brought together in what are called bounding blocks. The bounding blocks form the base of each individual unit of masonry, which is then placed on top of the previous units.
All masonry structures should have some type of drainage system in place to prevent damage to the floor above from water damage. Usually there are two main types of drainage systems available for use in masonry structures, perforated mortar joints and stone footer drains. Both of these methods of drainage are very effective at containing any water that may be present during construction or after construction. In some cases, concrete footer drains can be used instead of stone or perforated mortar joints.
Some masonry workers prefer to use brick construction. Many masons use a variety of different kinds of concrete blocks and mortar to construct their buildings. Other masons also use gypsum brick and plaster to construct some of their masonry structures.
When labor costs are less, many people choose to use sand instead of stone in their masonry construction projects. However, sand may cause problems in extreme heat or cold weather conditions, such as during the wintertime in cold climates. For this reason, many masonry constructions are now built with ceramic tile or sandstone flooring. Ceramic tiles are lightweight, cost effective, and easy to install.
There are some differences between brick and concrete masonry construction. One of these differences is that there are many variations of Masonry techniques. The way in which different Masonries are set on a building depends on the exact needs of that particular building. A typical masonry construction may be laid in one of several ways. These techniques include:
Masonry repair and restoration are not as easy as a home owner may think. When a Masonry structure begins to crack or crumble, it can take an enormous amount of time and effort to bring it back to its original condition. Many people do not realize that masonry work cannot be removed once the mortar has been poured. Although the mortar may have been replaced with new material, it is impossible to know whether or not the original soil pressure and other factors played a role in the failure of the mortar. If your Masonry building has suffered water damage, the repair and restoration process will be much more difficult.
Some of the most popular materials used to build Masonry structures include brick, stone, concrete blocks, wood, marble, granite, limestone, and quartzite. Each of these materials is capable of being used to build a wide variety of different buildings and structures. The most common materials used to build Masonry buildings are brick, stone, concrete blocks, wood, and granite. Even though concrete blocks and stone masonry are commonly used, there are other options that you may want to consider. One option that is becoming increasingly popular is using recycled materials to build new Masonry structures.
